Factors to Consider Before Getting Microdermabrasion
Using microdermabrasion to remove dead skin cells can be a great way to improve the appearance of your skin. It can help to remove acne scars and other signs of aging, such as fine lines and wrinkles. However, there are several factors you should consider before scheduling a microdermabrasion procedure.
Cost
Depending on your area of the country, the cost of microdermabrasion may vary. It is often more expensive in areas with a higher cost of living. In some locations, a single treatment session may cost as much as $800.
Microdermabrasion is a treatment that can help improve the appearance of fine lines, wrinkles, age spots, and acne scars. It can also help treat skin damage from sun exposure.
Microdermabrasion is a minimally invasive procedure that uses high-pressured crystals to exfoliate dead skin cells. The results are almost instant and provide a smoother, more even texture.
The procedure can be performed by an aesthetician or a plastic surgeon. The cost of microdermabrasion may be as low as $75 to $200 per session, depending on the skill level of the person performing the treatment and the location of the practice.
Microdermabrasion can be combined with other cosmetic procedures to achieve better results. Some providers offer discounts if you purchase a full package of treatments. This may be worth considering if you have several different cosmetic procedures to perform.
The cost of microdermabrasion is usually lower than other skin care treatments. This is due to the fact that microdermabrasion requires minimal recovery time. After a single treatment, most people can resume normal activities within a week.
The cost of microdermabrasion can vary depending on the type of device used and the skill level of the person performing the procedure. The cost may also be affected by the location of the practice and the amount of time spent performing the procedure.
Microdermabrasion is not covered by health insurance. It is considered an elective cosmetic procedure. However, the procedure may qualify as a tax deduction.
Side effects
Depending on the type of skin you have, you may experience some side effects of microdermabrasion. These side effects are temporary and usually disappear in a few days.
Some people may experience bruising and redness after microdermabrasion. These side effects are not common, but they may occur. If you do experience them, you may be able to use hydrocortisone cream to reduce the swelling and itching. You will also need to avoid direct sunlight for a day or two after the treatment.
Other side effects include a slight improvement in the appearance of keratosis pilaris. This is a condition that causes small, dilated blood vessels on the surface of the skin. The physical act of exfoliation increases blood flow in these capillaries. It is unlikely that you will experience a skin infection, but you should always consult a medical professional if you suspect you have one.
Having microdermabrasion can also increase your skin’s sensitivity to sunlight. For this reason, you should apply a generous amount of sunscreen before going outside. The UV rays can cause sun damage, as well as hyperpigmentation, or lightening of the skin.
If you have very sensitive skin, you may experience more severe side effects. Aside from the typical dryness, itching, and flaking, your skin may become red and swollen. This may last for a few days or even a week.
Some people may experience an allergic reaction to the crystals used for microdermabrasion. If you have any doubts about whether you are allergic to the crystals, consult your physician.
Some people may experience a temporary breakout of acne after microdermabrasion. It may happen around the treatment area or it may be a generalized outbreak. You may want to avoid spicy foods and beverages for the first 24 hours after treatment.
Safeness for all skin types
Getting microdermabrasion done on your skin is a great way to improve the health of your skin. It can reduce wrinkles and fine lines, improve skin tone, and remove age or sun spots. It is safe for all skin types and is a non-invasive procedure. However, you should be aware of the risks and side effects of getting the procedure.
Microdermabrasion can be done at a doctor’s office or at home. The procedure can last about an hour. Your healthcare provider will explain the procedure and provide you with a recovery leaflet. Before the procedure, you should avoid using any harsh skin products and tanning creams.
After the procedure, you should use a high-quality moisturizer. You should also apply sunscreen to protect your skin from UV rays. You should avoid direct sunlight for at least 24 hours. You should also drink plenty of water to hydrate your skin.
You should also avoid smoking for one week after the procedure. You should also avoid alcohol for at least 48 hours. You should also avoid taking aspirin or ibuprofen for at least a week. You should also refrain from exercising vigorously for about four to six weeks. You should also avoid chlorinated pools for at least a month.
In general, microdermabrasion has a low risk of side effects and complications. However, some people may experience more severe side effects. These side effects usually clear up within a few hours or days.
People with sensitive skin should avoid microdermabrasion. People who have active skin infections or are prone to scarring should also avoid it. Some of the complications of microdermabrasion include redness, swelling, and bruising.
You should also inform your healthcare provider about any medications you are taking. For example, people who are taking isotretinoin may experience side effects that could alter the outcome of the procedure.
In-office procedure
Whether you’re looking for a quick fix for acne scarring or a more in-depth solution for your aging skin, microdermabrasion can give you the results you’re looking for. This in-office procedure uses tiny crystals to break down dead skin cells, resulting in smoother, brighter skin.
This procedure is also used to treat sun damage and uneven skin tone. The procedure does not involve any pain or numbing agents, but you will notice redness and minor bruising.
During the treatment, your skin care professional uses a handheld device to scrub away the outermost layer of dead skin. Once the dead skin is removed, a moisturizing cream is applied. It is important to remember that you must apply sunscreen after the treatment is completed.
Depending on your skin’s condition, you may need to repeat this treatment a few times. Microdermabrasion is effective at treating acne scarring, uneven skin tone, melasma, and sun damage. It also stimulates collagen production, improves lymph flow, and smoothes out pores.
Your provider may recommend other skin treatments to achieve the best results. You may want to combine microdermabrasion with a chemical peel or facial to further enhance the results. If you have a history of fever blisters, pre-medicate with antiviral medication.
Before the treatment, you will need to avoid alcohol, aspirin, and waxing for a week. If you smoke, be sure to avoid it for a week as well. You should also avoid sun exposure for a few days.
You should also avoid tanning lotions and creams for a few days after your treatment. Your skin will be a little red, but it should return to normal within two weeks. You will want to apply a calming moisturizer and sunscreen after the treatment is finished.
Home microdermabrasion kits are not as effective
Purchasing at home microdermabrasion kits may seem like a good idea, but they are not as effective as professional treatments. Professional treatments involve more aggressive techniques. They remove more of the surface layer of skin, resulting in more dramatic results. But they also result in some skin irritation and breakouts.
The at-home kits do not provide the same depth of abrasion, which can lead to irritation and redness. They also require you to perform multiple treatments in order to see any improvement.
They also use smaller crystals to remove dead skin cells, which may irritate the skin. Some users have reported that the results are no better than a routine exfoliation procedure.
Professional microdermabrasion treatments are performed in a dermatologist’s office. They use specialized equipment, including sterile diamond heads, to perform the treatment. They also follow strict measures to sterilize the equipment.
Some at-home kits are battery-operated, while others are plug-in. Those that are plug-in may require more money for replacement parts, as fewer accessories are included.
The at-home kits also contain fewer active ingredients than professional products. These kits may also contain fragrances or retinoids, which can irritate the skin.
Those with chronic skin conditions should also consult a dermatologist before undergoing microdermabrasion. They should avoid the use of retinoids, as these drugs increase the risk of scarring.
A few at-home kits have had positive reviews. Some include tools for application, replacement filters, and other accessories. But they are also expensive.
Purchasing a quality Microderm machine may cost a bit more, but it is well worth it. It may not require you to replace many of its parts. It will also produce softer skin in four minutes.
Health Sources:
Health A to Z. (n.d.). HSE.ie. https://www2.hse.ie/az/
U.S. National Library of Medicine. (n.d.). https://www.ncbi.nlm.nih.gov/
Directory Health Topics. (n.d.). https://www.healthline.com/directory/topics
Health A-Z. (2022, April 26). Verywell Health. https://www.verywellhealth.com/health-a-z-4014770
Harvard Health. (2015, November 17). Health A to Z. https://www.health.harvard.edu/health-a-to-z
Health Conditions A-Z Sitemap. (n.d.). EverydayHealth.com. https://www.everydayhealth.com/conditions/
